Description
IN STOCK are: Orange and Blue
To order are: Green and Red
The SRX8Te RTR 1/8 Factory assembled and pre-set 1/8 scale RTR E-Truggy
- pre-painted body and large rear wing
- pre-mounted Truggy tyres
- waterproof 150A speedo (6S compatible)
- 2000 KV brushless motor
- 25kg metal-gear DragonRC servo
- 2.4 GHz transmitter
- aluminium chassis plate
- big bore shocks
- anti-roll bars
- 3 gear diffs
- available in 4 colours Orange, Red, Blue and Green – request when ordering
Main features:
– race ready high performance electric 1/8 4wd Truggy
– expertly pre-assembled and pre-set
– 4wd with Cardan shafts, 3 durable hi-performance HTD gear diffs, machined aluminium motor mount, super low longitudinal battery boxes, compact speedo-servo mount, unique angled steering system, 16mm big bore shocks, ball bearing mounted dual anti-roll bars FR and RR, 6061-T6 alloy shock tower FR and RR, durable suspension and transmission parts, captured suspension pins, the works !!
– Dragon-RC X4P-350 transmitter set
– Dragon-RC 150A waterproof speed controller
– Dragon-RC power full 2000kv brushless sensor less motor
– Dragon-RC 25kg waterproof strong servo with metal gears
– Dragon-RC high grip pre-mounted race tires and wheels
– Pre-painted and pre-cut bodyshell and large nylon rear aero-wing
– Full colour user manual and decal set included
Speed-controller:
The electronic speed controller is a fully Waterproof 150A from DragonRC with a small footprint which fits the SRX8Te RTR like a glove. The new modern design is very small and attractive looking. Top-quality soft silicone covered cables.
Brushless motor:
The DragonRC brushless motor is a strong 2000kv unit which gives lots of torque and amazing top speed and is anodized in same black colour as the other alloy parts of the car.
Chassis:
Chassis plate in 3mm 6061-T6 aluminium. Kick-up angle on front for better landings. Countersunk holes. Slots to locate the front and rear suspension mounts precisely. Angled sides to increase stiffness.
Bumper:
Aligned with chassis kick-up for precise landings and to protect front suspension holder and anti-roll bar.
Chassis stiffeners:
Composite stiffener front and rear, to give extra stiffness, but still allow some side-to-side flex as needed.
Central radio / servo mount:
Composite compact radio box which offers good space for the steering servo and the receiver.
Battery-cases / side-guards
The main eyecatchers are the extremely low laydown longitudinal placed battery-packs at each side of the car, being part of the side-guards, securely fastened with a Velcro strap, for easy and fast battery changes. The weight low in the car and in the right position, well balanced. The Lipo holders comply with ROAR legal packs/dimensions.
Motor mount:
The motor is placed in the most optimal position in the car, keeping motor-forces and transmission parts/alignment in mind. Only one-screw is needed to secure the BL motor, in the nicely designed durable machined aluminium motor mount. Space for additional motor-cooling available as needed.
The space for the motor allows a 2000kv brushless long body motor (DragonRC)
Steering blocks assembly
Composite steering blocks combined with 12deg C-hubs for precise steering. Spring steel wheel-axles with large size bearings and larger inner with precision threaded aluminum wheel-hubs with offset . Flanged and serrated wheel nuts to guarantee that you will not loose a wheel nut in a race.
Front suspension
Durable oversized lower suspension arms in strong composite nylon. On the lower side the downstops screws are mounted. The lower shock-mounting pins are secured with a grubscrews for maximum reliability.
Front and rear anti-roll bar
The front anti-roll bar system, consist of a spring steel bend wire, which is guided through the diff-cases and runs in ball bearing raced steel adaptors. The wire is linked to the lower suspension arm, with a captured adjustable threaded pivot ball, for very precise and low friction operation and easy tuning.
Rear suspension arms
Durable longer oversized lower suspension arms in strong composite nylon. On the lower side the down stops screws are mounted. The lower shock-mounting pins are secured with a small grub screw from the bottom.
Rear uprights assembly
Composite uprights with 3 upper roll-centre positions. Strong steel track-rods with L/R threading and strong ball joints to pre-set camber. Hard steel wheel-axles with large size bearings and larger inner ones with precision threaded aluminium wheel-hubs with offset. Flanged and serrated wheel nuts to guarantee that you will not loose a wheel nut in a race.
Shock tower rear / Wing mount and Body mount rear
4mm thick 6061-T6 aluminium shock tower, integrated into the rear section for extra stiffness, with 3 upper positioning holes for the shocks and 4 holes for roll-centre positions.
Composite rear straight MD wing, with a strong nylon mount, with angle adjustment. Central rear body mount.
Shock absorbers RCM big-bore 16MM
Anodized aluminium shock bodies with durable 4mm shock-rods. Adjustable nut to set the ride height setting. Shocks use large diameter membranes and large diameter O-rings and bushings to create a supersmooth and leak-proof package. Large diameter pistons are held in place by a nut on the polished shock-rods tops. Open type spring retainer to let dirt out easy.
Color-coded progressive shock springs are supplied for the 1st standard set-up and all springs are grinded flat top and bottom, and checked individually for tension and length and are matched.
Compact gear differentials
Large Volume Differentials and oversized gears.
Maximum performance and reliability from high volume large internal gear diffs. The internal gears are a staggering Mod 1.25 which puts them at the largest in the market place. Hardened spring-steel diff-coupler with connector running in 2 oversized bearings. The SRX8Te uses a 10T / 46T combo Gearing and a 44T central spur gear. This drive ratio will provide amazing acceleration combined with the low vehicle weight.
Front and rear drive
The front has captured driveshafts using a CVD system. The rear has durable brown S2 steel dog bones with hard steel pins. Brown S2 steel is also used for transmission parts, front and rear cardan shafts connect the differentials .
Body
Serpent Truggy body, fully pre-painted in a very attractive design and pre-cut too. The body has excellent handling, also supreme in jumps. Rear wing, the straight MD rear wing is included for great downforce and straight line stability.
Tires / wheels
The SRX8Te RTR is fitted with pre-mounted DragonRC buggy racing tires. The tires are glued on durable but flexible DragonRC race-wheels with moulded cell-foam inserts. A super-package for excellent grip on the most common surfaces.
X4P-350 transmitter set – Advanced 2.4GHz Control — Precision You Can Count On
The 426 Outlaw comes equipped with a 2.4GHz digital spread-spectrum radio system using FHSS 67-channel pseudo-random frequency hopping for rock-solid, interference-free control — even when the streets are crowded with other RC vehicles.
This isn’t just basic radio gear — it’s built for maximum reliability and zero signal loss, even at high speeds and long range.
- Full digital system for ultra-stable, responsive control
- Fail-safe functionality ensures you stay in control, even in unexpected situations
- Channel mixing support (CH1/CH2 & CH3/CH4) for easier setup of complex control schemes
- Power-saving features like a flashing LED at startup/shutdown, automatic power-off warning after 12 minutes, and full shutdown after 15 minutes of inactivity
This robust radio system gives you the confidence and safety to go full-send — with no second thoughts.
Super Tough Servo — Steel gears, Built to Last.
The 426 Outlaw doesn’t flinch when the pressure’s on — and neither does its steering. Out front, you’ll find a high-torque, steel-geared servo built to take abuse and deliver bulletproof control when it matters most, combat-grade hardware designed for precision, durability, and domination.
Whether you’re carving through corners at speed, holding your line in a drag pass, or just throwing it sideways in the parking lot, the SRX8Te responds with confidence and control.
When you’re heading into a gunfight, you don’t bring a butter knife — you bring cold hard steel.
Oils and grease
Top-quality silicone shock-oil, silicone diff oil and some grease is used to meet the standard set-up.
Manual and set-up
Full colour user manual with easy to follow steps, exploded views for easy spares ordering. A separate manual for the transmitter and the speed controller is included.
Decals
Black and white promo body-decals ; Serpent generic and SRX8e ones.
Packing
The RTR kit is packed in a colour full large strong packing box with protection for car and transmitter.
Service and Support
The Serpent distributor, dealer or agent is your source for more info, but also the Serpent website and Facebook groups.
IMPORTANT – Needed to complete the car:
- 4x AA batteries for the transmitter
- 2 x Lipo hard-packs 3800 mA or more
- charging equipment / power supply





























